AR09.10-D-1150B | Remove/install air cleaner housing | 6.4.99 |
ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6
ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6
ENGINE 611.983 in MODEL 690.6
D09.10-0016-06
1 Air intake hose
2 Top part of air cleaner housing
3 Air cleaner cartridge
4 Bottom part of air cleaner housing
5 Air intake hose
6 Gasket
7 Heat shield
8 Screw
9 Hose clamp
| Remove/install | ||
1 | Remove heat shield (7) | ||
2.1 | Detach air intake hose (1) at top part of air cleaner housing (2) | On engine 611.981/983/987 | |
2.2 | Remove hot film mass air flow sensor | On vehicles fitted with code MD1, MS5, MF8 | |
3 | Unclip top part of air cleaner housing (2) at bottom part of air cleaner housint (4) and take off | ||
4 | Take out air cleaner element (3) | ||
5 | Detach bottom part of air cleaner housing (4) at body | ||
6 | Take air intake hose (5) out of the inner fender and out of the rubber bush in the wheelhousing liner (arrow), then detach it at bottom part of air cleaner housing (4) | Installation: Ensure seal (6) between inner fender and air intake hose is correctly installed. | |
7 | Take bottom part of air cleaner housing (4) out of the rubber bushes in the inner fender and remove | ||
8 | Install in the reverse order |