ar0910d1150b

Remove/install air cleaner housing

Type ar · topic 09.10 · version 0102 · 2001-11-08

Applies to: ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6 ENGINE 611.983 in MODEL 690.6

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.10 Air cleaner — Series 611 (models 981, 983, 987) · Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.40 Air filter/air filter box — Series 611 (models 981, 983, 987) · Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

Also applies to engines/gearboxes: 612 981

AR09.10-D-1150B

Remove/install air cleaner housing

6.4.99

ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINE 611.983 in MODEL 690.6

Remove/install air cleaner housing

D09.10-0016-06

1 Air intake hose

2 Top part of air cleaner housing

3 Air cleaner cartridge

4 Bottom part of air cleaner housing

5 Air intake hose

6 Gasket

7 Heat shield

8 Screw

9 Hose clamp

Remove/install

1

Remove heat shield (7)

2.1

Detach air intake hose (1) at top part of air cleaner housing (2)

On engine 611.981/983/987

2.2

Remove hot film mass air flow sensor

On vehicles fitted with code MD1, MS5, MF8

AR07.07-D-1453A

3

Unclip top part of air cleaner housing (2) at bottom part of air cleaner housint (4) and take off

4

Take out air cleaner element (3)

5

Detach bottom part of air cleaner housing (4) at body

6

Take air intake hose (5) out of the inner fender and out of the rubber bush in the wheelhousing liner (arrow), then detach it at bottom part of air cleaner housing (4)

Installation: Ensure seal (6) between inner fender and air intake hose is correctly installed.

7

Take bottom part of air cleaner housing (4) out of the rubber bushes in the inner fender and remove

8

Install in the reverse order

Referenced documents