ar0703p6520rt

Remove/install injectors (ME-SFI)

유형 ar · 주제 07.03 · 버전 0101 · 2010-03-09

적용 대상: ENGINE 113.971 in MODEL 251.075 /175

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 07 혼합물 처리 › 07.03 분사노즐, 분사밸브, 라인 — 시리즈 251 (모델 075, 175)

EinPAS 15 엔진 › 15.45 엔진 매니지먼트 › 15.45.42 연료 분배기/레일/노즐/인젝터 — 시리즈 251 (모델 075, 175)

엔진/변속기에도 적용: 113 971

AR07.03-P-6520RT

Remove/install injectors (ME-SFI)

9.3.10

ENGINE 113.971 in MODEL 251.075 /175

Remove/install injectors (ME-SFI)

P07.03-2184-06

1 Fuel rail

7 Clamp

13 Sealing ring

Arrow: Square catch

Y62 Fuel injection valves

Remove/install

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel.

No fire, sparks, open flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Open the engine hood and raise it to vertical position

AR88.40-P-1000RT

2

Remove fuel distributor rail (1) together with fuel injectors (Y62)

AR07.03-P-1451RT

3

Detach clamps (7) from the fuel injection valves (Y62) and fuel distributor rail (1)

4

Remove fuel injection valves (Y62) from fuel distributor rail (1)

Check the sealing ring (13) for damage and replace if necessary. Otherwise, leaks may occur.

Installation: Ensure that the fuel injection valves (Y62) are seated correctly in the fuel distributor rail (1).

Installation: The clamp (7) must get locked in the square catch (arrow) at the fuel injection valves (Y62).

Installation: Moisten the sealing ring (13) with a little liquid lubricant before assembly.

Lubricant

*BR00.45-Z-1002-06A

5

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

6

Carry out engine test run and check fuel system for leaks

In the event of oil loss, determine and eliminate the cause; otherwise, there may be malfunctions and damage to the engine as well as the environment.

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00

A 000 989 01 60

참조 문서