ar0500p2011lfh

Remove/install hydraulic valve clearance compensating elements

유형 ar · 주제 05.00 · 버전 0100 · 2013-04-30

적용 대상: ENGINE 276.9 in MODEL 222

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 05 엔진제어장치 › 05.00 서문 — 시리즈 222

EinPAS 15 엔진 › 15.17 엔진 컨트롤 › 15.17.30 밸브 드라이브 — 시리즈 222

엔진/변속기에도 적용: 276 9**

AR05.00-P-2011LFH

Remove/install hydraulic valve clearance compensating elements

16.04.2013

ENGINE

276.9 in MODEL 222

Remove/install hydraulic valve clearance compensating elements

1

Roller-type cam follower

2

Compensation element

P05.00-2096-02

Remove/install

1

Remove camshafts

AR05.20-P-6992LFH

2

Remove roller cam follower (1) and compensation element (2)

Installation: Lubricate roller cam follower (1) and compensation element (2).

When removing several compensation elements (2) make sure that roller-type cam follower (1) with compensation elements (2), which were not replaced, are reinstalled at the previous fitting point. Mark roller-type cam follower (1) for the corresponding compensation element (2) if necessary.

Check

3

Check compensation element (2) for proper operation, replace if required


Only push compensation element (2) together by hand, do not use a steel tool.
The user interface of the compensation element will be damaged otherwise.

The compensation element (2) should not be pressed together with a normal force of the hand and only slightly by using strong pressure.

If several compensation elements (2) are defective, check the pressure oil supply to the cylinder head.

4

Install in the reverse order

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Carry out engine test run, checking the engine for proper function and leaktightness

참조 문서