Renew the rear radial retainer of the crankshaft

AR03.20-S-3063A

9.2.95

ENGINE 111.948 /978 in MODEL 638

ENGINE 111.979 in MODEL 901, 902, 903, 904

S03.20-3000-09

1 Flywheel / driving disc

2 Radial retainer of the crankshaft

3a  Insertion tool (series state)

3b  Insertion tool (repair state)

3c  Insertion tool (inner part)

 	Removing, installing
1	Remove the flywheel / driving disc (1)	Engine 111.948/978 in model 638.	AR03.30-S-8001A
		Engine 111.979 in model 901, 902, 903, 904.	AR03.30-D-8001C
2	With the aid of a screwdriver, push the crankshaft radial retainer (2) outwards.	 Pay attention not to damage the crankshaft and the housing hole of the crankshaft radial retainer (2). Use a clean cloth as support.
		 Assembly: Install the rear radial retainer (2) of the crankshaft.	AR03.20-S-3063-01A
			*111589084300
3	The assembly is done in reverse order.	 Before installing the transmission check oil leaktightness after spraying the cleaned and dried area with MB contrast spray.	*BR00.45-Z-1001-03A

111 589 08 43 00

Assembly tool

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-03A	Crack detector	A 000 989 03 59