ar0120s5014sd

Remove, install cylinder head cover

유형 ar · 주제 01.20 · 버전 0207 · 2011-02-25

적용 대상: ENGINE 646 in MODEL 636, 639

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 01 엔진 전체, 엔진 배기, 실린더 헤드, 실린더 크랭크케이스 › 01.20 엔진　배기, 실린더헤드　커버 — 시리즈 636 · 시리즈 639 · 시리즈 646

EinPAS 15 엔진 › 15.16 실린더 헤드 › 15.16.30 실린더 헤드 후드 — 시리즈 636 · 시리즈 639 · 시리즈 646

AR01.20-S-5014SD

Remove, install cylinder head cover

24.2.11

ENGINE 646 in MODEL 636, 639

Remove, install cylinder head cover

S01.20-4505-09

2 Line guide

3 Bolt

4 Leak oil line

5 Drain hose for cylinder head cover

B6/1 Hall sensor for camshaft

B6/17 Camshaft Hall sensor

6 Crankcase ventilation hose

7 Bolt

60 Cylinder head cover

Remove/install

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Danger!

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.

Deburr repair panels.

AS00.00-Z-0017-01A

1

Remove injectors

AR07.16-S-1000SD

2

Unhinge wiring (2)

To do this remove bolts (3), remove wiring (2) and press lightly to the side.

3

Remove leak oil line (4) to cylinder head cover (60)

Place leak oil line (4) to the side.

4

Unclip drain hose for cylinder head cover (5) below cylinder head

5

Detach crankcase ventilation hose (6) from cylinder head cover (60)

6

Disconnect electrical connector from Hall sensor for camshaft (B6/1) or camshaft Hall sensor (B6/17)

7

Remove bolts (7)

*BA01.20-N-1001-01M

8

Remove cylinder head cover (60)

Installation: Clean sealing surfaces and install new seals.

9

Install in the reverse order

Checking

10

Ensure gasket of cylinder head cover (60) is correctly installed

AR01.20-S-5014-01SD

11

Check engine oil level, adjust to correct level if necessary

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

12

Check for leaks with engine running

Crankcase ventilation, cylinder head cover

Number

Designation

Engine
646 in model 636, 639

BA01.20-N-1001-01M

Bolt, cylinder head cover to cylinder head

Nm

9

참조 문서