ar0120d9750us

Remove/install oil separator

유형 ar · 주제 01.20 · 버전 0100 · 2007-08-17

적용 대상: ENGINE 272.979 in MODEL 906

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 01 엔진 전체, 엔진 배기, 실린더 헤드, 실린더 크랭크케이스 › 01.20 엔진　배기, 실린더헤드　커버 — 시리즈 906

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.31 크랭크 케이스/오일 분리기/배기 — 시리즈 906

엔진/변속기에도 적용: 272 979

AR01.20-D-9750US

Remove/install oil separator

1.8.07

ENGINE 272.979 in MODEL 906

Remove/install oil separator

D01.20-1029-06

1 Oil separator

2 Screw

3 Hose

4 Gasket

Remove/install

1

Remove bolts (2)

*BA01.20-N-1003-01P

2

Remove oil separator (1) from cylinder head cover and detach from hose (3)

Intercept engine oil that flows out with an absorbent rag.

Checking

3

Check seal (4) for wear and damage

Replace oil separator (1) if necessary.

4

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Perform engine test run and check engine around oil separator (1) for leaks

Crankcase ventilation, cylinder head cover

Number

Designation

Engine
272.979
in model 906

BA01.20-N-1003-01P

Bolt connecting oil separator to cylinder head cover

Nm

12

참조 문서