1 | Model 447 with code CU1 (aerodynamic underfloor paneling) |
The retaining frame (6) remains on the integral carrier. |
S01.10-A039-80
S01.10-A025-79
2 | Align lifting platform with the corresponding major assembly mount below the vehicle and align with the marked areas on the integral carrier (3) and on the transmission. |
3 | Fix supports of the major assembly mount in place. |
4 | Allow supports of the major assembly mount to lie on the marked areas on the integral carrier (3) and on the transmission. |
5 | Secure integral carrier (3) centrally to the lifting platform using a tensioning strap. |
Commercially available devices/tools |
6 | Loosen screws (4) on the integral carrier (3). |
7 | Model 447 with transmission 725.0 with code ZG2 (permanent all-wheel drive) |
8 | Remove screws (2) and remove transmission carrier (1). |
Installation: Tighten screws (2) slightly by hand. |
9 | Remove screws/bolts (4). |
Installation: Lightly tighten bolts (4) by hand. |
10 | Model 447 with transmission 725.0 with code ZG2 (permanent all-wheel drive) |
Installation: Tighten screws (7) slightly by hand. |
11 | Carefully lower lifting platform somewhat. |
Pay attention to all detachable parts. |
Helper required. |
12 | Remove universal joint of the steering shaft from the steering gear and guide supporting joint out of the steering knuckles. |
Pay attention to all detachable parts. |
Helper required. |
13 | Completely lower lifting platform and remove integral carrier (3) together with the engine, transmission, and cooler unit. |
Pay attention to all detachable parts. |
Helper required. |
14 | Install in the reverse order. |