Crank engine with starter

AR01.10-D-0110WE

Crank engine with starter

23.5.11

Connect/disconnect

1

Turn transmitter key in EIS control unit to position "0" and remove

 To prevent unintentional starting of the engine.

2

Open cable tie (1), remove electrical connection 1 for engine wiring harness (X26/46) on CDI control unit and disconnect

 Expose the electrical wiring harness to engine until the pin assignment of the electrical plug coupling (2) can be recognized.

3

Attach adapter line (3) to the compression recorder (6)

  The adapter line (3) with associated extension line can be taken from the  electrical connection kit.

 Compression recorder

*001589762100

 Electrical connection set

*220589009900

4

Connect adapter line (3) to pin 3 on electrical plug coupling (2)

 Electrical connection set

*220589009900

5

Connect adapter line (4) with clip (5) to jump-start connection point connector (X4/43)

  The adapter line (4) and terminal (5) with associated extension line can be taken from the  electrical connection kit.

 Electrical connection set

*220589009900

Crank engine

 Danger!

Risk of death caused by being drawn into rotating vehicle parts

Do not insert your hand into rotating parts.
Wear closed and snug-fitting work clothes.
Secure area of rotating vehicle components against unauthorized access.

AS00.00-Z-0004-01A

 Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Actuate switch on compression recorder (6) to crank engine

 Compression recorder

*001589762100

7

Disconnect in reverse order