AR01.00-P-2410D | Disconnecting, connecting engine wiring harness | 17.2.95 |
ENGINE 604, 605, 606 in MODEL 210 up to 31.5.96
P01.00-0236-09
P01.00-0237-09
1 Component compartment cover B17 Intake air temperature sensor G2 Generator wiring harness N14 Pre-glow time relay W10 Battery ground below rear seat W11/1 Engine ground (ground strap) | X4 Connector terminal 30, left footwell X22 Engine compartment/transmission connector X22/1 Engine compartment/engine connector, autom. transm. X22/2 Engine compartment/engine connector, terminal 50 Y23/2x1 EDFI distributor-type injection pump connector |
Fig. item, etc. | Work instructions | ||
W10 | Battery ground | disconnect | |
N14x1 | Preglow time relay | Unplug connector (arrow). | |
2 | Remove component compartment cover | ||
X22, X22/2 | Unplug connectors in right of component compartment | Pay attention to fuses of plug connections! | |
B17x1 | Unplug intake air temperature sensor connector | ||
X22/1 | Unplug engine compartment/engine connector AG | ||
Y23/2x1 | Unplug EDFI distributor injection pump connector | ||
X4 | Connector terminal 30 left footwell | Unbolt cable on outside of body. | |
G2 | Disconnect generator wiring harness | ||
W11/1 | Unbolt engine ground (ground strap) | ||
Unplug AC compressor connector | If AC fitted |