ar0018t0001b

Compressed-air tank removal and installation

유형 ar · 주제 00.18 · 버전 0102 · 2005-07-12

적용 대상: MODELS NMB613.355 /358 /388 /455 /485

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 0 전체 › 00 차량-전체 › 00.18 차량　공압장치 — 시리즈 613 (모델 355, 358, 388, 455, 485)

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.35 압축 공기 시스템 › 21.35.60 압축공기 탱크 — 시리즈 613 (모델 355, 358, 388, 455, 485)

AR00.18-T-0001B

Compressed-air tank removal and installation

21.3.00

MODELS NMB613.355 /358 /388 /455 /485

Compressed-air tank removal and installation

T00.18-0001-04

Air tank locations

X Direction of travel

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle.

Use hydraulic floor jacks to raise the vehicle at the jacking points provided, then support with jacks.

AR00.60-T-1000B

2

Blow off compressed-air system's supply air

3

Remove underbody cladding

Only necessary when removing compressed air reservoir in front of front axle.

AR61.45-T-1000-01B

4

Detach connector for compressed air lines of compressed air reservoir

For"VOSS 230" compressed-air
connector.

AR42.10-W-0900A

For "VOSS 232" (NG 8, NG 12)
or "Schäfer SDF" (NG 6) compressed-air connector.

AR42.10-W-0900C

5

Detach bracket for compressed air reservoir

6

Remove compressed-air tank

7

Install in the reverse order

참조 문서