AP83.30-T-8312AA | Air conditioning - checking refrigerant level | 2.12.02 |
MODELS NMB671.015 /020 /021 /030 /042 with CODE (HKA) Konvekta ACX 602 air conditioning with roof heater
1 Inspection glass
T83.30-0064-03
| Testing | ||
Danger! | Risk of explosion from welding or soldering work on closed air conditioning system. Risk of poisoning from inhaling overheated refrigerant vapors. Risk of injury. Contact with liquid refrigerant may result in injury to the skin and eyes. | Do not carry out any welding work on the closed air conditioning system or in the surrounding area. No smoking or open flames. Wear eye protection and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged. | |
Danger! | Risk of accident as vehicle may start off by itself with the engine running. Risk of injury as working around the engine during start-up or while running may result in contusions and burns | Secure vehicle to prevent it from moving. | |
1 | Start engine | Coolant temperature of min. 50 °C must be ensured. | |
2 | Switch on air conditioning and set maximum cooling capacity at the temperature controller | See operating instructions for air conditioning system. | |
3 | Remove recirculating air filter | ||
4 | Allow engine to run at approx. 1400 rpm | ||
5 | Check refrigerant level in inspection glass (1) after approx. 5 minutes | The air conditioning is filled correctly when the refrigerant in the inspection glass (1) is visibly free of bubbles. With severe bubble formation: | |
| Check circuit of air conditioning system for leakage.(subject to separate repair order) | ||
6 | Install recirculating air filter | ||
7 | Switch air conditioning off and turn engine off |
참조 문서
- ap8310t8383aa
- ar8330t120901c
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험
- as8300z000101a 밀폐된 에어컨에서 용접 작업이나 납땜 작업을 실행할 경우 발생할 수 있는 폭발 위험 과열된 냉매 증기의 흡입으로 인한 중독 위험 액체형 냉매와의 피부 및 안구 접촉에 의한 상�