ap4720d0780c

Replace fuel filter

유형 ap · 주제 47.20 · 버전 0115 · 2010-08-19

적용 대상: ENGINE 900.9, 904.9 in MODEL 668, 670

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 47 연료 시스템, 드라이브 트레인 에너지 공급 › 47.20 연료펌프, 필터 — 시리즈 668 · 시리즈 670 · 시리즈 900 (모델 9**) · 시리즈 904 (모델 9**)

EinPAS 16 연료/에너지 공급, 엔진 › 16.10 연료 공급 › 16.10.41 필터/물 분리기 — 시리즈 668 · 시리즈 670 · 시리즈 900 (모델 9**) · 시리즈 904 (모델 9**)

AP47.20-D-0780C

Replace fuel filter

17.8.10

ENGINE 900.9, 904.9 in MODEL 668, 670

Replace fuel filter
Replace fuel filter

N07.57-0226-01

1 Threaded cap

2 Sealing ring

3 Filter element

4 Dirt collecting tank

5 Fuel filter housing

N07.57-0225-01

Removing

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

1

Open tank cap on fuel tank

To release vacuum in fuel tank.

2

Remove threaded cap (1) from fuel filter housing (5)

Remove the screw cap (1) with the filter element (3) only after the fuel has drained out of the fuel filter housing (5).

3

Remove threaded cap (1) with cleaner element (3) and unclip cleaner element (3) by pressing at side

Ensure that no foreign bodies get into the fuel filter housing (5)

Under no circumstances rinse out the fuel filter housing (5).

4

Pull out the dirt collecting tank (4) at the fishplate from the fuel filter housing (5)

Ensure that the deposited dirt does not enter the fuel filter housing (5), do not empty the dirt collecting bowl (4) in the fuel filter housing (5) and never rinse out the fuel filter housing (5). Otherwise, there can be damage to the fuel system.

5

Clean screw cap (1) and dirt collecting bowl (4)

Install

6

Replace seal (2)

Grease sealing ring (2) slightly.

7

Insert new filter element (3) into the screw cap (1)

8

Insert the dirt collecting tank (4) into the fuel filter housing (5)

Install components in correct positions.

9

Screw on screw cap (1) with filter element (3) and tighten

*BA47.20-N-1001-02A

10

Close tank cap on fuel tank

11

Start the engine and bleed the fuel system

Run the engine for approx. 1 minute. The fuel system is bled automatically.

12

Check the fuel filter housing (5) for leaks when the engine is running

13

Turn off engine

Fuel filter

Number

Designation

Engine
900.9, 902.9

Engine
904.9, 906.9

BA47.20-N-1001-02A

Cover on fuel filter housing

Nm

25

25

참조 문서