ap3010t3022a

Lubricate joints of engine control system, check joints for freedom of movement and proper seating

유형 ap · 주제 30.10 · 버전 0101 · 2002-03-11

적용 대상: ENGINES 402, 441, 446, 447, 489

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 30 제어, 정속주행장치 › 30.10 기계적 제어 — 시리즈 441 · 시리즈 447

EinPAS 15 엔진 › 15.45 엔진 매니지먼트 › 15.45.35 엔진 컨트롤 — 시리즈 441 · 시리즈 447

엔진/변속기에도 적용: 402 ***, 446 ***, 489 ***

AP30.10-T-3022A

Lubricate joints of engine control system, check joints for freedom of movement and proper seating

19.11.01

ENGINES 402, 441, 446, 447, 489

Lubricate joints of engine control system, check joints for freedom of movement and proper seating

T30.10-0010-06

Inspect

1

Check ball joints as well as lever and shaft bearings to make sure that they can move freely and are not worn

Do not lubricate plastic joints

2

Press ball sockets of throttle linkage off the ball pins, pack with grease and press on again

With secured ball sockets: fit retainer again.

Sheet 267.0

BB00.40-P-0267-00A

3

Oil bearing points of all throttle control shafts, throttle control levers and open joints of throttle control linkage as well as cables

Accelerator pedal, relay lever, bell crank, throttle control shaft, throttle valve shaft as well as ball sockets and ball heads must operate easily and free of play

4

Clean lubricating nipple.

5

Grease with grease gun until new grease emerges.

Remove surplus grease.

The number of lubricating nipple depends on the vehicle version.

Sheet 267.0

BB00.40-P-0267-00A

6

Clean lubricating nipple after greasing.

참조 문서