AP25.20-L-2981B | Clutch actuation - replace brake fluid | 19.1.09 |
MODEL 668.###, 670.### ## as of 099978
with CODE (B16) Hydraulic 2-circuit / compressed air 2-circuit brakes
with CODE (GF1) Transmission 710.6 (S 5-42)
L25.20-0006-01
N25.20-0210-01
1 Expansion reservoir
2 Protective cap
3 Venting hose
4 Bleed valve
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Brake fluid notes | All models | |
1 | Unscrew cap of expansion reservoir (1). | Drain old brake fluid. | |
The level of the brake fluid should still extend to above that of the supply opening. | |||
2 | Connect bleeder unit | Pay attention to manufacturer's operating instructions. | |
Bleeder unit, pneumatic | |||
Bleeder unit, electric | |||
3 | Remove the protective cap (2) and attach the bleed hose (3) to the bleed valve (4) | ||
4 | Open bleeder valve (4) | Allow brake fluid to flow until it exits free of bubbles at the bleed hose (3). | |
Open the bleed valve (4) by at least 45°. | |||
| |||
5 | Close the bleed valve (4) | Remove bleed hose (3) and put on protective cap (2) | |
6 | Disconnect bleeder unit | Pay attention to manufacturer's operating instructions. | |
Take care that the bleeder unit is not under pressure, if so then lower pressure in bleeder unit. | |||
7 | Correct fluid level in expansion reservoir (1) | ||
8 | Screw on expansion reservoir cap (1). | ||
9 | Check proper function of clutch operator | If the clutch-release mechanism fails to provide satisfactory performance, repeat the bleeding operation. | |
10 | Check tightness of breather valve (4) |
Clutch mechanism
참조 문서
- ah4250p000101a 브레이크액 관련 지침
- as4250z000101a 브레이크액 음용으로 인한 중독 위험, 브레이크액이 피부 또는 눈에 닿아 발생하는 상해 위험