Remove/install refrigerant compressor bracket

AR83.55-D-5301SG

14.7.10

MODEL 906.6 /7 with ENGINE 646.984 /985 /986 /989 /990
with CODE (H08) High-performance air conditioning
with CODE (N63) Front engine power takeoff with carrier for additional refrigerant compressor

Remove/install refrigerant compressor bracket

D83.55-1125-08

1 V-belt

2 Tensioner pulley

3 Bolts

4 Screw

9 Oil pan

A9/7 2nd refrigerant compressor

5 Screw

6 Bracket

7 Bolts

8 Carrier

	Removing
1	Remove alternator		AR15.40-D-5032SD
2	Slacken off and remove V-belt (1)		AR13.21-D-0160-01SD
3	Remove 2nd refrigerant compressor (A9/7) at carrier (8) and hang to one side with refrigerant lines connected
4	Undo screws (3, 4, 5) and remove carrier (8)
5	Remove tensioner pulley (2) with bracket from carrier (8)	 Only when replacing the carrier (8). The bracket of the tensioner pulley (2) is fastened to the carrier (8) with a screw/bolt.
	Install
6	Undo screws (7) far enough until the bracket (6) can be moved
7	Fit carrier (8) onto cylinder crankcase and turn in screws (3)		*BA83.30-N-1003-01F
8	Push bracket (6) upwards until it makes contact with the oil pan (9), then turn in the screw (4) and then finally screw (5)		*BA83.30-N-1006-01F
9	Tighten bolts (7)		*BA83.30-N-1007-01F
10	Mount tensioner pulley (2) with bracket on carrier (8), do not tighten screw/bolt of bracket	 Only when replacing the carrier (8).
11	Mount 2nd refrigerant compressor (A9/7) onto carrier (8)		*BA83.30-N-1018-01F
12	Fit and tension V-belt (1)		AR13.21-D-0160-01SD
		Pretension of V-belt for 2nd refrigerant compressor	*BE13.22-N-1001-01E
			*BA13.25-N-1008-01P
13	Install alternator		AR15.40-D-5032SD

Check values for single-belt drive

Number	Designation			Engine 646.984/985/ 986/989/990 in model 906 with code H08, N62, N63


BE13.22-N-1001-01E	V-belt tension on 2nd refrigerant compressor/alternator	Measured on the tensioner pulley clamping lever	Nm	15

Belt tensioning device

Number	Designation		Engine 646 in model 906 with code H08, N62, N63


BA13.25-N-1008-01P	Bolt, tensioner pulley bracket to refrigerant compressor/alternator carrier	Nm	94

 Air conditioning system

Number	Designation		Model 906.6/7 with code H08, N63


BA83.30-N-1003-01F	Bolt, refrigerant compressor carrier to crankcase	Nm	20
BA83.30-N-1006-01F	Bolt for bracket to refrigerant compressor carrier	Nm	20
BA83.30-N-1007-01F	Bolt, bracket to oil pan	Nm	35
BA83.30-N-1018-01F	Bolt, refrigerant compressor to carrier	Nm	20

参照文書