Removing, installing rear PTO shaft · ar5510g0200a · Mercedes-Benz WIS

AR55.10-G-0200A

Removing, installing rear PTO shaft

7.3.97

MODEL 427.### ## as of 187036
with CODE (N32) Rear PTO shaft 1 3/8" spline
with CODE (N37) Rear PTO shaft 1 3/4" spline

G55.10-3004-09

Shown on model 427 with one intermediate bearing

1 Rear PTO shaft mounting

2 PTO shaft guard

3 Intermediate bearing

4 PTO shaft gear

5 Bracket

6 Transmission

G55.10-3012-09

Shown on model 427 with split intermediate bearing

1 Rear PTO shaft mounting

2 PTO shaft guard

3 Intermediate bearing

4 PTO shaft gear

5 Transmission

 	Removing, installing
 Danger!	Risk of injury due to being trapped and crushed when tilting the cab	Nobody should be in the tilting range of the cab while tilting the cab. Always tilt cab up to its final position and secure with the safety support.	AS60.80-Z-0001-01A
1	Tilt cab		AR60.80-G-0010B
2	Remove rear PTO shaft mounting (1)		AR55.10-G-2000A
3	Remove intermediate bearing (3)	On model 427.102/105/107	AR55.10-G-3000A
		On model 427.111/112/115/116/117/118	AR55.10-G-3000B
4	Install in the reverse order