AR35.30-D-0458-05A | Preparing drive bevel gear for installing | ||
| Clamp for clamping assembled drive pinion |
Puller
745 589 00 33 00
D35.30-0121-01
1 Place clamp (16) around the tapered roller bearing outer races and clamp drive pinion in vise.
2 Attach puller (17) to drive flange (9) with two hexagon bolts (18) so that the hexagon bolts exert a force of approx. 30 Nm on the ring nut (10) and the puller (17) abuts flat with the drive flange (9).
This tensions the tapered roller bearing outer races axially and the spacing washer halves cannot slip into the oil groove when pulling out the drive pinion.
D35.30-0120-01
1 Drive pinion 12 Spacer ring
2 Crown wheel 13 Spacing washer halves
3 Inner tapered roller bearing 14 Spacer disks
4 Outer tapered roller bearing 15 Cylindrical roller bearing
5 Tab washer
6 Spacer disk
7 Radial seal ring
8 Collared nut
9 Drive flange
10 Ring nut
11 Ring nut oil groove