ar2645d1001a

Remove/install switchover valve

種別 ar · トピック 26.45 · バージョン 0101 · 2017-02-16

適用: Transmission 711 in model 906 with code N05 (Power take-off countershaft (2c) without flange) Transmission 711 in model 906 with code N07 (Power take-off countershaft (2b) with flange)

「ja」では利用できません。英語で表示しています。

位置付け

機能グループ 2 シャーシ › 26 マニュアル・トランスミッション › 26.45 PTO、PTO用トランスミッション — シリーズ 906

EinPAS 17 駆動装置/アクスル › 17.20 トランスミッション › 17.20.13 ライン/ホース/バルブ — シリーズ 906

エンジン/トランスミッションにも適用: 711 ***

AR26.45-D-1001A

Remove/install switchover valve

16.02.2017

Transmission

711 in model 906

with code N05 (Power take-off countershaft (2c) without flange)

Transmission

711 in model 906

with code N07 (Power take-off countershaft (2b) with flange)

Remove/install switchover valve

1

Vacuum line

2

Switchover valve

3

Electrical connector

Pfeil

Release

D26.45-1023-05

Remove/install

1

Open engine hood

2

Remove vacuum line (1)

3

Unlock switchover valve (2) (arrow) and unclip

4

Release and disconnect electrical connection (3)

5

Remove switchover valve (2)

6

Install in the reverse order

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear buttoned-up and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Perform engine test run and check functioning of switchover valve (2)

参照文書