ar2645d1001a

Remove/install switchover valve

Type ar · topic 26.45 · version 0101 · 2017-02-16

Applies to: Transmission 711 in model 906 with code N05 (Power take-off countershaft (2c) without flange) Transmission 711 in model 906 with code N07 (Power take-off countershaft (2b) with flange)

Where it sits

Function group 2 Chassis › 26 Manual transmission › 26.45 Power take-off, PTO transmission — Series 906

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.13 Line/hose/valve — Series 906

Also applies to engines/gearboxes: 711 ***

AR26.45-D-1001A

Remove/install switchover valve

16.02.2017

Transmission	711 in model 906
	with code N05 (Power take-off countershaft (2c) without flange)
Transmission	711 in model 906
	with code N07 (Power take-off countershaft (2b) with flange)

Remove/install switchover valve

1	Vacuum line
2	Switchover valve
3	Electrical connector
Pfeil	Release

D26.45-1023-05

 	Remove/install
1	Open engine hood
2	Remove vacuum line (1)
3	Unlock switchover valve (2) (arrow) and unclip
4	Release and disconnect electrical connection (3)
5	Remove switchover valve (2)
6	Install in the reverse order
 Danger !	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear buttoned-up and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
7	Perform engine test run and check functioning of switchover valve (2)

Referenced documents

as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.