S26.00-4501-09
1 | Transmission | 2 | Oil filler plug |
| Check | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Perform power disconnect on high voltage system | ||
2 | Remove water shield | ||
3 | Clean transmission (1) in area of oil filler screw (2) | ||
4 | Remove oil filler screw (2) | ||
5 | Check oil level, top up transmission oil, if necessary | Add transmission oil up to lower edge of filler opening. | |
Hydraulic fluid | |||
6 | Screw in oil filler screw (2) | Filling screw to transmission housing | |
7 | Install splash guard | ||
8 | Perform initial startup of high-voltage system |
参照文書
- ah0000z030001a 高電圧車両電源回路および/またはリチウムイオンバッテリおよび/またはガスドライブシステムならびに個人用保護装備の装備車に関する一般注意事項
- ar5410s1160ev
- ar6130s0010ev
- as0000z003501a 30 V交流電圧 (AC) または60 V直流電圧 (DC) がかかった構成部品およびシステムでの作業時の生命の危険