ar1540t5032ca

Remove and install generator

種別 ar · トピック 15.40 · バージョン 0101 · 2012-02-22

適用: ENGINE 457.941 in MODEL 613.368 Alternator I

「ja」では利用できません。英語で表示しています。

位置付け

機能グループ 1 エンジン › 15 エンジン 電気システム › 15.40 オルタネータ — シリーズ 613（モデル 368）

EinPAS 25 車両電源回路/ネットワーク/マルチファンクション › 25.20 車両電源回路 › 25.20.30 オルタネータ — シリーズ 613（モデル 368）

エンジン/トランスミッションにも適用: 457 941

AR15.40-T-5032CA

Remove and install generator

14.2.12

ENGINE 457.941 in MODEL 613.368
Alternator I

Remove and install generator

T15.40-0017-02

1 Cooling air hose

2 Nut

3 Cover

4 Electrical cable

5 Alternator

6 Screw, nut

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect electric cables at battery.

AR54.18-T-0002CA

2

Remove the V-belt of the alternator

Detach the tensioning device.

AR13.21-T-0140CA

3

Remove the engine compartment flap at the bottom

AR88.40-T-1100CA

4

Detach the cooling air hose (1)

5

Remove the nuts (2) and detach the cover (3)

6

Detach the electric cables (4) from the alternator (5)

7

Remove the screws and nuts (6) and take out the alternator (5)

8

Install in the reverse order

参照文書