AR14.40-W-2001B | Remove/install injection line for exhaust aftertreatment system | 22.3.11 |
ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS4) BlueTec 4
ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS5) BlueTec 5
W14.40-1182-06
1 Metering device
2 Injection line
3 Injection nozzle
Modification notes
11.8.08 | Value changed: Injection line union nut on injection nozzle | ||
Value changed: Injection line union nut on metering device |
| Remove/install | ||
Danger! | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
| Notes on use, material properties and handling of AdBlue® | ||
1 | Open maintenance flap | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
2 | Tilt cab | ||
| Notes on tilting the cab | ||
3 | Remove top right soundproofing on frame | ||
4 | Remove injection line (2) | Seal holes with a suitable plug. | |
Installation: Replace injection line (2) after each removal. | |||
| |||
| |||
5 | Install in the reverse order |
Exhaust aftertreatment, Blue Tec
参照文書
- ah1440n000101a AdBlue の適用、物質特性、および取扱いに関する注意事項
- ah6080n000301a ドライバ·キャビンのチルトに関する注意事項
- as1440z000101a AdBlue ラインおよび接続している構成部品での作業では、火傷あるいは負傷の危険があります。 AdBlue を取り扱う際に、皮膚および目を負傷する危険がありま す。 AdBlue を誤飲する
- as6080z000101a ドライバ·キャビンを傾ける際、手や指が挟みこまれ、怪我をする危険があります。