T13.20-0018-01
A Alternator I V-belt
B Refrigerant compressor drive belt
C Poly-V-belt
D Alternator IIV-belt
1 Tensioning pulley clamping screw
2 Lock nut
3 Nut
T13.20-0021-01
| Remove/install | ||
1 | Turn off ignition | ||
2 | Open the maintenance flap at the tail | ||
3 | Remove the V-belt of the alternator | ||
4 | Loosen the clamping screw (1) and the lock nut (2) | ||
5 | Turn the nut (3), release the poly-V-belt (C) and detach | Installation: Check the poly-V-belt and tension. | |
| Inspect condition of V-belt, re-tension | ||
6 | Install in the reverse order |