ar1322t1202ca

Remove/install poly V-belt

Type ar · topic 13.22 · version 0100 · 2005-07-12

Applies to: ENGINE 457.941 in MODEL 613.368

Where it sits

Function group 1 Engine › 13 Air compressor, belt drives › 13.22 Single-belt drive — Series 613 (models 368)

EinPAS 15 Engine › 15.18 Belt drive › 15.18.30 Belt/belt pulley/clamping device/guide pulley — Series 613 (models 368)

Also applies to engines/gearboxes: 457 941

AR13.22-T-1202CA

Remove/install poly V-belt

3.6.02

ENGINE 457.941 in MODEL 613.368

Remove/install poly V-belt
Remove/install poly V-belt

T13.20-0018-01

A Alternator I V-belt

B Refrigerant compressor drive belt

C Poly-V-belt

D Alternator IIV-belt

1 Tensioning pulley clamping screw

2 Lock nut

3 Nut

T13.20-0021-01

Remove/install

1

Turn off ignition

2

Open the maintenance flap at the tail

3

Remove the V-belt of the alternator

AR13.21-T-0140CA

4

Loosen the clamping screw (1) and the lock nut (2)

5

Turn the nut (3), release the poly-V-belt (C) and detach

Installation: Check the poly-V-belt and tension.

Inspect condition of V-belt, re-tension

AP13.20-T-1350CA

6

Install in the reverse order

Referenced documents