1 | Recharging air tube (intake) |
2 | Turbocharger manifold |
3 | Electric Plug |
4 | Screws |
5 | Fuel pipe (excess) |
6 | Bolt |
B111 | Temperature combined sensor and charge air pressure |
S10 | Start key Engine (only up to engine end number 917256) |
S10.1 | Start key Engine/engine stop (only up to engine stop number from 917257) |
S11 | Stop key Engine (only up to engine end number 917256) |
W09.41-1030-06
| Remove/install | ||
1 | Remove the charge air tube (1) from the air radiator to the charge air manifold (2) |
| |
2 | Remove the screw (6) and move the fuel return line (5) from the charging air manifold (2) | ||
3.1 | Unlock and detach the electric plug from the start key Engine (S10) and engine stop (S11) | Until the final engine No. 917256 | |
3.2 | Unlock and detach the electric plug from the start/stop key Engine (S10.1) | From engine final number 917257 | |
4 | Remove the engine wiring harness at the supercharge air manifold (2) | ||
5 | Unlocking and separating electric plugs (3) on the combined sensor of charge air temperature and turbo pressure (B111) | ||
6 | Dismount the turbocharger manifold(2) | Installation: Test the sealing rings on the screws (4). | |
Observe the installation position of the joints in the charge air manifold (2). | |||
.Intake manifold to cylinder head | |||
7 | Install in reverse order |