Replacing rear crankshaft radial seal

AR03.20-T-3063A

Replacing rear crankshaft radial seal

7.4.98

 

Removing, installing

1

Remove flywheel

AR03.30-T-8002A

2

Remove rear crankshaft radial seal 1)

Use a lever to press rear crankshaft radial seal out of timing case.

 Installation:

- Replace crankshaft radial seal and pack half of space between dust and sealing lip with universal grease.

- Insert crankshaft radial seal into drift (2) and knock into timing case with a plastic-headed hammer. The hole in the  drift must fit exactly into the straightpin of the crankshaft during this step.

 Drift

*403589041500

3

Install in the reverse order