Operation no. of the operation texts or standard texts and flat rates | |||||
Category | Op. no. | Operation text | Time | Acc. no. | Code |
N | 027231 | Replace AdBlue line | 49 920 62 | ADBLUE-OBM | |
N | 027234 | Remove/install AdBlue container (AdBlue line removed) | 49 920 62 | ADBLUE-OBM | |
N | 027233 | Replace frame wiring harness (AdBlue line removed) | 49 920 62 | ADBLUE-OBM | |
N | 027232 | Replace AdBlue control unit (AdBlue line removed) | 49 920 62 | ADBLUE-OBM | |
D14.40-0133-08
1 | AdBlue® line | 3 | Frame wiring harness | 4 | AdBlue® control unit | ||
2 | AdBlue® container |
| Remove/install | ||
Warning | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Notes on use, material properties and handling of AdBlue® | |||
1 | Disconnect electrical connector at AdBlue® control unit (4) | ||
| With code MA6 (Emission class Euro 6b N1 GR.III/N2), with code MB6 (Low-emission vehicle Euro 6 Gr. 1), with code MH1 (Low-emission engine EPA 10 / CARB), with code MH3 (Low-emission engine EPA 13 / CARB), with code MH5 (Low-emission engine EPA 14/CARB), with code MH7 (Low-emission engine EPA 16CARB), with code MP6 (Engine version Euro VI) | ||
If no crystal formation is visible on the electrical connectors after 4h drying time | |||
| |||
Operation step 2 | |||
If crystal formation is visible on the electrical connectors after 4h drying time | |||
| |||
Replace AdBlue® control unit (4) | |||
|
| ||
2 | Disconnect electrical connector of AdBlue® line (1) to frame wiring harness (3) | If no crystal formation is visible on the electrical connector after 4h drying time | |
| |||
Operation step 3 | |||
If crystal formation is visible on the electrical connectors after 4h drying time | |||
| |||
Replace frame wiring harness (3) | |||
3 | Replace AdBlue® line (1) | ||
| With code MH1 (Low-emission engine EPA 10 / CARB), with code MH3 (Low-emission engine EPA 13 / CARB) | ||
4 | Install in the reverse order | ||
5 | Perform SCN coding of instrument cluster | ||
|
Parts ordering note |
Part no. | Designation | Quantity |
Q1111005 | AdBlue® parts kit (includes: AdBlue® line, sealing ring and clamp) for 906##3 | 1 n.B. |
Q1121005 | AdBlue® parts kit (includes: AdBlue® line, sealing ring and clamp) for 906##5 | 1 n.B. |
A906 003 37 99 | Frame wiring harness (order with chassis number) | 1 n.B. |
A642 900 92 00 | AdBlue® control units | 1 n.B. |
Documenti citati
- ah1440n000101a Avvertenze sull'impiego, sulle caratteristiche e sulla manipolazione dell'AdBlue
- ah5400p000101a Avvertenza per evitare danni ai componenti elettronici dovuti a scarica elettrostatica
- ar1440d2001sa
- ar1440d2020s Smontare, montare la centralina di comando modulo telaio SCR
- ar5421p001302x Codifica SCN con SDflash Online
- as1440z000101a Pericolo di ustioni e scottature dovute a liquido bollente durante i lavori sulle tubazioni AdBlue e sui componenti ad esse collegati. Pericolo di lesioni alla pelle e agli occhi durante la manipolazione di AdBlue. Pericolo di