B49.10-A000-09
1 | Clamp (before the exhaust gas after treatment unit) | 5 | Exhaust pipe | Seta D | Opening | ||
2 | Clamp (after the turbocharger) | 6 | Conical spring washer | Seta E | Opening | ||
3 | Exhaust gas flexible pipe | 7 | Sealing ring | ||||
4 | Exhaust pipe (after the turbocharger) | Seta C | Opening |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on self-locking nuts and bolts | ||
| Remove | ||
1 | Open the engine compartment | The access to perform maintenance and repair works varies according to the manufacturer and the body type. | |
2 | Disconnect battery ground cable | ||
3 | Remove the acoustic encapsulations | ||
4 | Remove the clamps (1 and 2) | ||
5 | Release the exhaust gas flexible pipe (3) from the exhaust gas pipe (4) | ||
6 | Pull the exhaust gas flexible pipe (3) out the exhaust gas pipe (5) | ||
7 | Remove the conical spring washer (6) with the sealing ring (7) from the exhaust gas flexible pipe (3) | ||
| Install | ||
8 | Check the exhaust gas flexible pipe (3) for damages | | |
The folds on the outside of the new exhaust gas flexible pipe (3) must be especially verified. | |||
In case of damage: | |||
| |||
Replace the exhaust gas flexible pipe (3). | |||
9 | Clean the sealing surface of exhaust gas tubes (4 and 5) and of the exhaust gas flexible pipe (3) | ||
10 | Place the exhaust gas flexible tube (3) on the exhaust gas tube (5) and on the exhaust gas tube (4) with new clamps (1 and 2) | Use a new conical spring washer (6) and a new sealing ring (7). | |
11 | Align the exhaust gas flexible tube (3) and tighten the clamps (1 and 2) | Screw of the clamp of the flexible exhaust pipe in the exhaust gas after-treatment system | |
Screw of the clamp of the exhaust pipe to the flexible exhaust pipe | |||
12 | Install the acoustic encapsulation | ||
13 | Connect ground cable to battery | ||
14 | Start the engine and check the exhaust system for leak-tightness | Visual inspection. | |
15 | Stop the engine | ||
16 | Close the engine compartment |
Documenti citati
- ah0000n000101a Avvertenze su viti e dadi autobloccanti
- ah0000n500001h Avvertenze per evitare danni causati da impurità o corpi estranei
- ar5410b0003evi
- as0000z000201a Pericolo di lesioni alla pelle e agli occhi nel maneggiare oggetti caldi o incandescenti
- as0000z000501a Pericolo di infortunio per l'avviamento fortuito del veicolo con motore in funzione. Pericolo d'infortuni a causa di schiacciamenti o ustioni in caso di interventi durante l'avviamento o il motore acceso