Remove/install automatic linkage adjuster

AR42.15-B-0010TC

12.02.16

Vehicle 958.0, 958.1

W42.15-1005-06

Representing at axle type 731.72

1 Pin

2 Cotter pin

3 Screw

4 Indicator disc

5 Spacer washer

6 Lock-ring

7 Adjustment screw

8 Coupling positioner

Arrow Detent

	Remove and install
1	Reposition coupling positioner (8) turning adjusting screw (7) to the initial position	 It is possible to hear crackling noises by turning back.
		Install: adjust the clearance.	AR42.10-B-0181TB
2	Release screw (3)	Install: adjust the command arm in coupling positioner (8).	AR42.15-B-0010-02TB
			*BA42.15-B-1003-01B
3	Remove the lock-ring (6)
4	Remove spacer washer (5) and indicator disc (4)	Install: put indicator disc (4) in the brake camshaft so that the two detents (arrow) are opposite.
5	Remove pin (1)	Install: use new cotter pin (2).
6	Remove coupling positioner (8)	Install: check and adjust the axial play in the brake camshaft.	AR42.15-B-1050-02TA
			*BE42.15-B-1001-01E
7	Install in reverse order

Test values for mechanical system

Brake mechanical system

Número	Denominação		Chassis 958.0/1 with front axle with drum brake


BA42.15-B-1003-01B	Control lever attachment bolt	Nm	20...25