ar4210b1090ta

Checking brake drum and brake linings for wear

Tipo ar · tema 42.10 · versione 0127 · 2016-02-12

Valido per: Vehicle 958.0, 958.1, 958.2, 958.4

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 42 Freni impianto idraulico e meccanico › 42.10 Freno di servizio — Serie 958 (modelli 0**, 1**, 2**, 4**)

EinPAS 21 Freni/impianto di depressione/impianto pneumatico › 21.15 Freno di servizio/impianto di depressione › 21.15.40 Freno di servizio anteriore — Serie 958 (modelli 0**, 1**, 2**, 4**)

EinPAS 21 Freni/impianto di depressione/impianto pneumatico › 21.15 Freno di servizio/impianto di depressione › 21.15.42 Freno di servizio posteriore — Serie 958 (modelli 0**, 1**, 2**, 4**)

AR42.10-B-1090TA

Checking brake drum and brake linings for wear

12.02.16

Vehicle 958.0, 958.1, 958.2, 958.4

Checking brake drum and brake linings for wear

W42.10-0062-12

Represented in rear axle 748.2

1 Brake lining

A Total thickness of the new brake lining

B Minimum lining thickness

	Remove
1	Remove wheels		AR40.10-B-1100D
2	Remove the brake drums	Vehicle 958.2/4	AR42.10-B-1010TA
		Vehicle 958.0/1	AR42.10-B-1010TD
	Check
3	Inspect the brake drum for fissures due to heat, roughness and wear		*BE42.10-B-1001-12E
		 If necessary, machine or replace the brake drum. After grinding or replacing the brake drum, linings (1) must be replaced: 
		Replace the brake linings.	AR42.10-B-1040TA
4	Check the lining thickness (1)		*BE42.10-B-1001-13E
		 If necessary, replace the brake linings (1).	AR42.10-B-1040TA
	Install
5	Install the brake drums	Vehicle 958.2/4	AR42.10-B-1010TA
		Vehicle 958.0/1	AR42.10-B-1010TD
6	Install the wheels		AR40.10-B-1100D

Drum brake

Número	Denominação				Vehicles 958.0, 958.1, 958.2, 958.4


BE42.10-B-1001-12E	Brake drum inside diameter		Normal	mm	410.0...410.2
			Repair I	mm	411.5...411.7
			Repair II	mm	413.0...413.2
			Wear limit	mm	414.5

Brake shoes

Número	Denominação				Chassis 958.0/1/2/4 with drum brake


BE42.10-B-1001-13E	Lining thickness		Normal	mm	17.0...17.3
			Repair I	mm	18.0...18.3
			Repair II	mm	19.0...19.3

Documenti citati