W42.10-0058-06
1 Rivet
2 Brake linings
3 Locking ring
4 Pin for the return spring
5 Brake shoes
Nota de modificação
| Remove | ||
1 | Remove the wheels | ||
2 | Remove the brake drum | Vehicle 958.2/4 | |
Vehicle 958.0 | |||
3 | Remove the brake shoes (5) | Driven front axle: | |
Vehicle 958.0 | |||
Non-driven front axle: | |||
Vehicle 958.2/4 | |||
Vehicle 958.0 For this vehicle, no repair instructions have been prepared | |||
Rear axle: | |||
Vehicle 958.2/4 | |||
Vehicle 958.0 For this vehicle, no repair instructions have been prepared | |||
4 | Remove the locking rings (3) and the pins from the return springs (4) | On the cast brake shoes (5) no lock ring is installed. | |
5 | Pass the rivets (1) with a drill and remove the brake linings (2) from the shoe (5) | Always replace the brake linings (2) axle-wise. | |
| Check | ||
6 | Check the brake drum and the thickness of the linings | ||
7 | Check the bearing surface of the brake linings (2) on the shoes (5) | If required, rework or replace the brake pads (5). | |
| Install | ||
8 | Rivet new brake linings (2) | ||
| Guidelines for riveting brake linings | ||
9 | Install the locking rings (3) and the pins on the return springs (4) | There is no lock ring (3) available on the cast brake shoes (5). | |
10 | Install the brake shoes (5) | Driven front axle: | |
Vehicle 958.0 | |||
Non-driven front axle: | |||
Vehicle 958.2/4 | |||
Vehicle 958.0 For this vehicle, no repair instructions have been prepared | |||
Rear axle | |||
Vehicle 958.2/4 | |||
Vehicle 958.0 For this vehicle, no repair instructions have been prepared | |||
11 | Grind the brake linings (2) | ||
12 | Install the brake drum | Vehicle 958.2/4 | |
Vehicle 958.0 | |||
13 | Install the wheels |
Brake shoes