ar3540b064901b

Check/adjust axial play of shift collar (interaxle differential lock)

Tipo ar · tema 35.40 · versione 0100 · 2016-02-12

Valido per:

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 35 Asse posteriore › 35.40 Bloccaggi differenziale — Serie 386 (modelli 059, 354, 364, 367, 369, 384, 387, 389) · Serie 682 (modelli 308, 318) · Serie 693 (modelli 348, 386, 396) · Serie 958 (modelli 1**)

EinPAS 17 Organi della trasmissione/assale › 17.51 Assale posteriore › 17.51.38 Sistema di innesto — Serie 386 (modelli 059, 354, 364, 367, 369, 384, 387, 389) · Serie 682 (modelli 308, 318) · Serie 693 (modelli 348, 386, 396) · Serie 958 (modelli 1**)

Valido anche per motori/cambi: 741 ***, 741 93*, 741 95*, 743 104, 743 106, 743 132, 743 143, 743 149, 743 153, 745 ***, 746 ***

AR35.40-B-0649-01B

Check/adjust axial play of shift collar (interaxle differential lock)

Inter-axle lock

Número

Denominação

Rear axles 743.104/106/132, 743.143/149/153, 746.890

Rear axles 741.93, 741.95, 745.520/525/590

BE35.40-B-1001-01A

Clearance between the coupling sleeve and the longitudinal differential drive gear

mm

0.5

0.5

Check/adjust axial play of shift collar (interaxle differential lock)

B35.40-0007-01

Check

1 Install a M18x1.5 (3) screw to the longitudinal lock drive cylinder.

2 Totally engage the sliding coupling sleeve (1) applying torque to the screw until the longitudinal lock is engaged.

3 Measure with a feeler gauge the axial slack between the sliding coupling sleeve (1) tooth and the tooth root from the countershaft gear (2) coupling gripper.

Check/adjust axial play of shift collar (interaxle differential lock)

B35.40-0001-01

Adjust

4 If the axial slack between the sliding coupling sleeve and the coupling gripper is not correct, release the nut (4) and carry out the regulation tightening or loosing the adjusting screw (3) at the drive axle (5).

5 After regulation, tighten the nut (4) to block the adjusting screw (3).