B32.20-0083-09
B32.20-0084-09
Rear spring articulation with shackle
1 Spring rear bracket, with shackle, fastened on the side rail
2 Tapped inside shackle plate, for the articulation bolts
3 Outside shackle plate
4 Flange bolt (without nut) of the spring bottom rear articulation on the shackle
5 Flange bolt (without nut) of the shackle top rear articulation
6 Housing of the elastic bushing on the spring rear bracket fastened on the side rail
7 Elastic bushing of the shackle top articulation of the rear spring
8 Metal bushing integrated in the elastic bushing
9 Spacer tube (made of methylene poly-oxide), assembled inside the elastic bushing
10 Spring rear adapter (eyelet)
11 Elastic bushing of the shackle bottom rear articulation of the spring
12 Metal bushing integrated in the elastic bushing (is part of the bushing)
13 Distance metal tube of the shackle rear bottom articulation
Rear spring front articulation
14 Spring front bracket, fastened on the side rail
15 Flange bolt (without nut) of the spring front articulation
16 Spring front adapter (eyelet)
17 Elastic bushing of the spring front articulation
18 Metal bushing integrated in the elastic bushing (is part of the bushing)
19 Distance metal tube of the spring front articulation
20 Chassis side rail
| Important information and preliminary measures | Always follow the recommended personal safety measures to avoid accidents as well as the environmental protection measures. | |
Considering that the front springs have fundamental importance in vehicle behavior, we recommend that the maintenance is always carried out in both rear springs, right and left. | |||
| Remove | ||
1 | Remove the vehicle rear springs | ||
Spring rear articulations | |||
2 | Remove the flange bolts (5) and separate the plates, inside (2) and outside (3) of the shackle | ||
3 | Remove the complete elastic bushing (7) from its housing (6) on the bracket (1) fastened on the vehicle side rail | Utilize the appropriate device. | |
4 | Remove the complete elastic bushing (11) from the spring rear adapter (10) (eyelet) | Utilize the appropriate device. | |
| Check | ||
5 | Examine the bolts (4) and (5) of the spring rear articulations, especially the threads for condition | Should it be necessary, replace the bolts (4) and (5) of the shackle. | |
6 | Examine the conditions of the two threads and the state of the inside plate (2) of the shackle. Examine the outside plate (3). | If necessary, replace them. | |
7 | Clean and check the housing (6) of the elastic bushing in the bracket (1), the housing in the adapter (eyelet) of the spring (10) and check the respective measurements | Width of the blades on the adapters. | |
Should it be necessary, replace the components of the housings, the brackets or the spring leaves. | |||
| Installing | ||
Spring rear articulations | |||
8 | Install a new complete elastic bushing (7) in the housing (6) on the rear bracket (1) fastened on the chassis side rail | Apply petroleum jelly around the bushing (7). | |
Utilize the appropriate device. | |||
9 | Install a new complete elastic bushing (11) in the spring rear adapter (10) (eyelet) | Apply petroleum jelly around the bushing (11). | |
Utilize the appropriate device. | |||
10 | Wipe the excess petroleum jelly around the bushings (7) and (11) | ||
| Remove | ||
Spring front articulation | |||
11 | Remove the complete elastic bushing (17) from the spring front adapter (16) (eyelet) | Utilize the appropriate device. | |
| Check | ||
12 | Examine the bolt (15) of the spring front articulation, especially the threads for condition. | Should it be necessary, replace the bolt (15) of the front articulation or the spring bracket. | |
13 | Check the housing of the elastic bushing (17) in the spring adapter (16) (eyelet) | Clean the housing and if necessary, replace the spring components. | |
| Installing | ||
Spring front articulation | |||
14 | Install a new complete elastic bushing (17) in the spring front adapter (16) (eyelet) | Apply petroleum jelly around the bushing (17). | |
Utilize the appropriate device. | |||
Center the bushings. | |||
15 | Wipe the excess petroleum jelly around the bushing (17) | ||
16 | Install the spring on the vehicle |
Rear axle steel suspension
Número | Denominação | Vehicles 979.013/ 016 | Vehicles 979.046 | |||
BE32.20-B-1010-02D | Width of blades in adapters (eyelets) | mm | 70 | 70 | ||
652 589 00 33 01
Device
652 589 00 33 11
Threaded spindle
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1001-06A | Vaseline | - |