B29.10-0033-09
1 Clutch pedal
2 Clutch pedal auxiliary spring (adjustable)
3 Auxiliary spring button
4 Auxiliary spring adjusting nut
5 Screw with limiting stopper (adjustable)
6 Pedal stopper adjusting flange nut
A Auxiliary pedal spring length, adjusted
B Clutch pedal travel measured on a 360 mm radius from the core of the pedal joint center shaft
C Adjustment of the pedal limiting stopper
Adjust | |||
1 | Check the adjustment of the hydraulic transmitter cylinder drive shaft | Hydraulic transmitter cylinder drive shaft should be adjusted. Refer to: Removing and installing the clutch pedal. | |
Vehicles 979.013/016. | |||
Vehicles 979.046. | |||
Adjust pedal limiting stopper | |||
2 | Release flange nut (6), rotate the limiting stopper (5) to dimension "C", then tighten the nut (6) to the specified torque | | |
In this position, with the auxiliary spring (2) adjusted, the clutch pedal will have its "B" travel measured at a 360 mm radius from the center of the joint pin and a tilt angle of 27°. | |||
Dimension “C” | |||
Dimension “B” | |||
Adjust auxiliary spring | |||
3 | Tighten or release adjusting nut (4) until dimension “A” | Vehicles 979. 013/016 and 979.046 | |
4 | Engage the clutch pedal several times | ||
5 | Check the working efficiency of the clutch drive |
Pedals, bearing bracket
Número | Denominação | Vehicles 979.013/016 | Vehicles 979.046 | |||
BE29.10-B-1001-01D | Length A of the auxiliary spring | mm | 71 | 63,5 | ||
BE29.10-B-1002-01D | Inclination of the clutch pedal lever | Z519.201/16 | degrees | 25 | - | |
Z519.201/55 | degrees | - | 27.55 | |||
Z519.201/18 | degrees | - | 23 | |||
BE29.10-B-1003-01D | Clutch pedal stroke B | Z519.201/16 | mm | 156 | - | |
Z519.201/55 | mm | - | 167,4...175,4 | |||
Z519.201/18 | mm | - | 143...148 | |||
BE29.10-B-1004-01D | Height C of the stop bolt | Z519.201/16 | mm | 28 | - | |
Z519.201/55 | mm | - | 17,4 | |||
Z519.201/18 | mm | - | 25 | |||
Pedals, bearing bracket