Remove/install gear control (GS) control unit

Tipo ar · tema 26.20 · versione 0101 · 2016-02-12

Valido per: Manual transmission 715.3 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)Manual transmission 715.5 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 26 Cambio meccanico, presa di forza secondaria › 26.20 Comando elettronico-pneumatico (EPS) - Comando marce (GS) — Serie 958

EinPAS 17 Organi della trasmissione/assale › 17.35 Sistema di innesto/comando delle marce › 17.35.11 Centralina di comando/relè — Serie 958

Valido anche per motori/cambi: 715 3**, 715 5**

AR26.20-B-2000A

Remove/install gear control (GS) control unit

12.02.16

Manual transmission 715.3 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Manual transmission 715.5 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Remove/install gear control (GS) control unit

W26.60-1113-11

1 Console

2 Connector

3 Screws

A15 Gear command module (GS)

	Remove and install
1	Turn off engine
2	Pull console (1) up and release gear command module screws (GS) (A15)
3	Push console (1) down and pull the gear command module screws (GS) (A15)
4	Unlock and pull connector (2) out	 Unlock connector (2) pressing unlocker (arrow)
5	Install in reverse order