Remove/install gear control (GS) control unit

Type ar · topic 26.20 · version 0101 · 2016-02-12

Applies to: Manual transmission 715.3 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)Manual transmission 715.5 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Where it sits

Function group 2 Chassis › 26 Manual transmission › 26.20 Electronic Power Shift (EPS) - Gear Control (GS) — Series 958

EinPAS 17 Drivetrain/axle › 17.35 Shift mechanism/gear control › 17.35.11 Control unit/relay — Series 958

Also applies to engines/gearboxes: 715 3**, 715 5**

AR26.20-B-2000A

Remove/install gear control (GS) control unit

12.02.16

Manual transmission 715.3 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Manual transmission 715.5 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Remove/install gear control (GS) control unit

W26.60-1113-11

1 Console

2 Connector

3 Screws

A15 Gear command module (GS)

	Remove and install
1	Turn off engine
2	Pull console (1) up and release gear command module screws (GS) (A15)
3	Push console (1) down and pull the gear command module screws (GS) (A15)
4	Unlock and pull connector (2) out	 Unlock connector (2) pressing unlocker (arrow)
5	Install in reverse order