1 | Ignition coil |
2 | Fastening screws |
3 | Support |
4 | Electric cables connector |
5 | Spark plug wire |
6 | Ignition plug |
7 | Cylinder head cover |
B15.20-0013-04
| Remove/install | ||
Danger | Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas. | Remove any sources of ignition. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
1 | Disconnect the battery negative cable or turn-off the master switch. | Access for maintenance and repair work execution vary according to the body type/manufacturer. | |
2 | Disconnect the electrical cables connectors (4) from the ignition coil (1). | Unlock the electrical cables connector (4) and pull it out of the ignition coil terminal (1). | |
3 | Remover the attachment bolts (2) and the bracket (3). | Fastening of the ignition coil | |
4 | Remove the ignition coil (1) and the plug cable (5). | Pull out the ignition coil (1) until the plug cable (5) disconnects from the ignition plug (6). | |
5 | Install in reverse order. |
Documenti citati
- as0000z001801a Pericolo di esplosione a causa della fuoriuscita di gas infiammabili o surriscaldamento dei serbatoi del gas. Pericolo di lesioni dovuto a ustioni alla pelle e agli occhi. Pericolo di congelamento di parti del corpo in caso di
- as0000z003501a Pericolo di morte durante lavori su componenti e sistemi con U >= 30 V di tensione alternata (CA) o U >= 60 V di tensione continua (CC)