Remove/install ignition coils

AR15.12-B-2003B

Remove/install ignition coils

15.11.2019

Engine

376.919 in model 382.068

1

Ignition coil

2

Fastening screws

3

Support

4

Electric cables connector

5

Spark plug wire

6

Ignition plug

7

Cylinder head cover

 

Remove/install

 Danger

Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.

Remove any sources of ignition.
Protective clothing, safety gloves and safety glasses must always be worn.
Ensure that the work area is adequately ventilated.
When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.

AS00.00-Z-0018-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

1

Disconnect the battery negative cable or turn-off the master switch.

 Access for maintenance and repair work execution vary according to the body type/manufacturer.
Refer to the body makers instructions.

2

Disconnect the electrical cables connectors (4) from the ignition coil (1).

 Unlock the electrical cables connector (4) and pull it out of the ignition coil terminal (1).

3

Remover the attachment bolts (2) and the bracket (3).

 Fastening of the ignition coil

*BA15.10-B-1002-01A

4

Remove the ignition coil (1) and the plug cable (5).

 Pull out the ignition coil (1) until the plug cable (5) disconnects from the ignition plug (6).

5

Install in reverse order.

 Ignition system

Number

Designation

Engine 376.919,

BA15.10-B-1002-01A

Fastening of the ignition coil

8.8

Nm

25

10.9

Nm

-