Shown on model 906.111 |
1 | AdBlue® tank |
2 | Cap |
3 | Nuts |
4 | Tensioning straps |
5 | Mounting consoles |
D14.40-0131-10
Shown on model 906.111 |
1 | AdBlue® tank |
6 | Electrical connectors |
7 | AdBlue® injection line |
M89 | AdBlue® delivery pump |
D14.40-0129-11
Warning | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
Notes on use, material properties and handling of AdBlue® | |||
| Remove/install | ||
1 | Lift/jack up vehicle | ||
2 | Unscrew nuts (3) on tensioning straps (4) of AdBlue® container (1) | Do not adjust jam nuts. | |
Installation: Pay attention to correct position of anti-chafe bands on tensioning straps (4). | |||
Nut/bolt, mounting console for AdBlue® container to frame | |||
3 | Support AdBlue® container (1) | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
Underlay with suitable wooden blocks. | |||
4 | Push the AdBlue® container (1) outwards until the cap (2) is accessible | | |
5 | Remove cap (2) | ||
6 | Separate Electrical connections (6) | ||
7 | Disconnect AdBlue® injection line (7) at the AdBlue® delivery pump (M89) | | |
Press the connector of the AdBlue® injection line (7) against the connection for the AdBlue® delivery pump (M89), press both catch hooks together at the same time and carefully detach the connector. | |||
8 | Clean connection immediately and close off with clean stop plugs | Record plug | |
9 | Remove AdBlue® container (1) from the mounting consoles (5) | ||
10 | Drain AdBlue® tank (1) | When replacing the AdBlue container (1). | |
| 000 588 01 71 00 Extraction pump | ||
Installation: Fill with new AdBlue®. | |||
AdBlue® container and filler line | |||
11 | Install in the reverse order | ||
12 | Attach diagnostic system and reset the calculated fill level of the AdBlue® tank (1) | ||
| |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
13 | Perform an engine test run and check connections on AdBlue® tank (1) for leaktightness |
Filling capacity for BlueTEC (SCR) diesel exhaust treatment |
Number | Designation | Engine 642 in model 906.1/2 | ||
BF14.40-N-1001-01A | AdBlue® container and filler line | Filling capacity - initial filling | Liter | 23 |
Sheet | ||||
129 589 00 91 00
Record plug
Documenti citati
- ad0000d200004sd Collegare STAR DIAGNOSIS, leggere la memoria guasti
- ah1440n000101a Avvertenze sull'impiego, sulle caratteristiche e sulla manipolazione dell'AdBlue
- ar0060d1000h Sollevare il veicolo, montarlo sui cavalletti
- as0000z000501a Pericolo di infortunio per l'avviamento fortuito del veicolo con motore in funzione. Pericolo d'infortuni a causa di schiacciamenti o ustioni in caso di interventi durante l'avviamento o il motore acceso
- as1440z000101a Pericolo di ustioni e scottature dovute a liquido bollente durante i lavori sulle tubazioni AdBlue e sui componenti ad esse collegati. Pericolo di lesioni alla pelle e agli occhi durante la manipolazione di AdBlue. Pericolo di
- ws0100p0092b 000 588 11 62 00 Alloggiamento per gruppi
- ws1400p0013b 000 588 01 71 00 Pompa di aspirazione
- ws2600p3309b 000 588 10 62 00 Piastra di alloggiamento