ar1440b2041a

Check AdBlue® concentration

Tipo ar · tema 14.40 · versione 0101 · 2017-12-05

Valido per: Engine 457.9 Engine 924.9 Engine 926.9

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 14 Collettore di scarico, freno motore, impianto di depurazione gas di scarico › 14.40 Post-trattamento gas di scarico, AdBlue

EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.1 Informazione basilare

Valido anche per motori/cambi: 457 9**, 924 9**, 926 9**

AR14.40-B-2041A

Check AdBlue® concentration

17.11.2017

Engine

457.9

Engine

924.9

Engine

926.9

Check AdBlue® concentration

1

Prism

2

Transparent cover

3

Regulating screw

4

Sight glass

5

Refractometer

A

Brix scale

B

AdBlue scale

W14.40-1417-06

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Check

1

Adjust the refractometer (5) to determine the AdBlue concentration

AR14.40-B-2041-01A

2

Remove a little Remove a small volume of AdBlue from its reservoir

3

Place 1 or 2 drops of AdBlue on the prism (1) of the refractometer (5)


The remaining parts of the refractometer (5) can not come into contact with AdBlue,
because it can penetrate inside the same.

When closing the cover (2) the AdBlue will be distributed evenly

4

Look through the viewfinder (4) against a light background

Scales can be adjusted by turning the viewfinder (4).

5

View the measurement value in the light/dark limit of the AdBlue scale (B)


The AdBlue concentration is correct when the urea content is above 30%,
Otherwise, AdBlue should be replaced.

The AdBlue urea content is 32.5 %. Minor changes are regulated by the exhaust gas aftertreatment system.

6

Carefully clean the prism (1) and the tilting cover (2) of any AdBlue residues

The refractometer (5) is extremely sensitive to impact and scratches.

For cleaning, should use only water, without adding cleaning products.

Documenti citati