ar1440b2038a
Remove/install NOx sensor with controller unit
Tipo ar · tema 14.40 · versione 0301 · 2019-11-22
Valido per: Engine 924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2 Engine 926.9 in model 368, 382.17/18, 384.0
Non disponibile in “it”; mostrato in Inglese.
Collocazione
Gruppo funzionale 1 Motore › 14 Collettore di scarico, freno motore, impianto di depurazione gas di scarico › 14.40 Post-trattamento gas di scarico, AdBlue — Serie 368 · Serie 382 (modelli 17*, 18*) · Serie 384 (modelli 0**, 2**) · Serie 685 (modelli 282, 284, 289, 290) · Serie 979 (modelli 2**)
EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.11 Centralina di comando/relè — Serie 368 · Serie 382 (modelli 17*, 18*) · Serie 384 (modelli 0**, 2**) · Serie 685 (modelli 282, 284, 289, 290) · Serie 979 (modelli 2**)
EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.12 Sensore/interruttore/fascio di cavi — Serie 368 · Serie 382 (modelli 17*, 18*) · Serie 384 (modelli 0**, 2**) · Serie 685 (modelli 282, 284, 289, 290) · Serie 979 (modelli 2**)
Valido anche per motori/cambi: 924 9**, 926 9**
AR14.40-B-2038A
| Remove/install NOx sensor with controller unit
| 07.11.2019
|
Engine
| 924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2
|
Engine
| 926.9 in model 368, 382.17/18, 384.0
|
1
| Electric connection
|
| 4
| Support
|
| 7
| NOx sensor with control unit (17B08)
|
2
| Electric wire
|
| 5
| Bolt
|
| 8
| NOx sensor control unit
|
3
| Reduction catalyst
|
| 6
| Power cable (NOx control unit to the electric connection plug)
|
| 9
| NOx sensor
|
| Remove/install
|
|
|
1
| Turn off ignition
|
|
|
Topical note
| Notes on self-locking nuts and bolts
|
| AH00.00-N-0001-01A
|
2
| Remove the NOx (8) control unit on the holder (4)
| ]The NOx sensor control unit (8) must always be removed first, otherwise removing the NOx sensor (9) may damage the power cable (2) by twisting it.
|
|
|
|
| The NOx sensor control unit (8) and the NOx sensor (9) form a set and must be removed together.
|
|
|
|
| .NOx sensor control unit on support
| *BA14.40-B-1043-02B
|
3
| Disconnect the power cable (6) from the electrical connection (1), and loosen the electrical cable (2) from its brackets
|
|
|
4
| Remove the NOx sensor (9)
| Installation: Apply paste to the NOx sensor (9) thread.
|
|
|
|
| Paste, hot lubrication 1 kg, DBL 6879.20
| *BR00.45-Z-1005-06A
|
|
|
| .NOx sensor on silencer
| *BA14.40-B-1042-02B
|
5
| Install in reverse order
|
|
|
Exhaust gas after-treatment
|
Number
| Designation
|
| Engine 924.9, 926.9 except Liquid Only
|
BA14.40-B-1042-02B
| NOx sensor on silencer
| Nm
| 50
|
Exhaust gas after-treatment
|
Number
| Designation
|
| Engine 924.9, 926.9 except Liquid Only
|
BA14.40-B-1043-02B
| NOx sensor control unit on support
| Nm
| 12
|
Number
| Designation
| Order number
|
BR00.45-Z-1005-06A
| Paste, hot lubrication 1 kg, DBL 6879.20
| A 000 989 76 51
|
Documenti citati
