ap4710b4730a

Clean fine-mesh suction filter of fuel tank

Tipo ap · tema 47.10 · versione 0102 · 2016-08-17

Valido per: Model all

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 47 Impianto di alimentazione del carburante, alimentazione di energia catena cinematica › 47.10 Serbatoio carburante — Serie 900 (modelli 9**) · Serie 902 (modelli 9**) · Serie 904 (modelli 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modelli 917, 918, 924, 953)

EinPAS 16 Alimentazione di carburante/alimentazione di energia motore › 16.10 Alimentazione di carburante › 16.10.40 Serbatoio del carburante/dispositivo di riempimento — Serie 900 (modelli 9**) · Serie 902 (modelli 9**) · Serie 904 (modelli 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modelli 917, 918, 924, 953)

Valido anche per motori/cambi: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

AP47.10-B-4730A

Clean fine-mesh suction filter of fuel tank

21.07.2016

Model

all

Clean fine-mesh suction filter of fuel tank
Clean fine-mesh suction filter of fuel tank

Fuel tank (example)

1

Sealing ring

2

Sieve filter

B47.10-0003-01

B47.10-0001-01

Danger !

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Check

1

Remove from the fuel reservoir, the fuel measuring assembly (floater/suction tube)

The service described next will have to be carried out with empty fuel reservoir or at maximum with 20 liter fuel

2

Check the filtering screen (2) for obstruction by impurities

Should it be obstructed, disassemble it, clean it with compressed air jets and assemble it again. If necessary, renew filtering screen.

3

With a flashlight, check the inside of the fuel reservoir

With the aid of equipment such as "Clean Diesel", fill the reservoir with about 20 liter Diesel oil and make it circulate for at least 30 minutes. During this operation direct the return hose to several places inside the reservoir so the fuel jet displaces dirt sediments.

In case dirt deposits are found.

Carry out internal cleaning, to be charged separately.

4

Install the fuel gauge assembly into the fuel reservoir

Documenti citati