Check ignition coil

AP15.10-B-0010GAS

Check ignition coil

19.11.2019

Engine

350.905 in model 382.1

1

Ignition coil

2

Coil test kit

3

Electrical connector



Check

 Danger

Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.

Remove any sources of ignition.
Protective clothing, safety gloves and safety glasses must always be worn.
Ensure that the work area is adequately ventilated.
When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.

AS00.00-Z-0018-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

1

Disconnect the spark plug cable (1) from the ignition coil

2

Fit securely the straight angle (90 degrees) end of the coil test kit (2) in the ignition coil terminal (1)

 Do not attempt to adjust the coil test kit. The kit is pre-adjusted and is not adjustable. Attempting to adjust it can result in damages to the tool.

 Measuring device

*055589282100

3

Connect a proper grounding cable

4

Check the wiring and the electrical cables for attachment, and specially if there are not friction points, because it can produce sparks.

5

Run the engine at idle speed and check the spark plug play by the viewing window. If there is a stable, permanent spark, the ignition coil (1) is OK; if there is no spark at all, replace the ignition coil (1) and test it again



AR15.12-B-2003GAS

6

Perform the procedure for the other ignition coils