1 | Bolts |
2 | Ignition coil |
3 | Support |
4 | Washers |
5 | Nuts |
6 | Electrical connector |
B15.12-0005-11
| Remove/install | ||
Danger | Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas. | Remove any sources of ignition. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
1 | Disconnect the electrical connectors (6) of the ignition coil (2) | Observe spark plug cables for correct installation. | |
Check spark plug cables for possible damage, if necessary replace them. | |||
2 | Remove the bolts (1), the nuts (5) and the washers (4) | Assembly hardware attachment | |
3 | Remove ignition coil (2) from support (3) | Remove ignition coil from support by pulling it straight up. Do not force the ignition coil back and forth during removal. This can cause damage to the spark plug, the insulator of the spark plug or ignition coil. | |
4 | Install in reverse order |
Documenti citati
- as0000z001801a Pericolo di esplosione a causa della fuoriuscita di gas infiammabili o surriscaldamento dei serbatoi del gas. Pericolo di lesioni dovuto a ustioni alla pelle e agli occhi. Pericolo di congelamento di parti del corpo in caso di
- as0000z003501a Pericolo di morte durante lavori su componenti e sistemi con U >= 30 V di tensione alternata (CA) o U >= 60 V di tensione continua (CC)