ap1440d1452hl

Check diesel particulate filter

Tipo ap · tema 14.40 · versione 0202 · 2016-04-05

Valido per: Engine 642, 651.9 in model 906 with code ZU8 (National version for USA)

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 14 Collettore di scarico, freno motore, impianto di depurazione gas di scarico › 14.40 Post-trattamento gas di scarico, AdBlue — Serie 651 (modelli 9**) · Serie 906

EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.50 Unità di post-trattamento dei gas di scarico — Serie 651 (modelli 9**) · Serie 906

Valido anche per motori/cambi: 642 ***

AP14.40-D-1452HL

Check diesel particulate filter

31.03.2016

Engine

642, 651.9 in model 906

with code ZU8 (National version for USA)

Check

1

Check fill level using diagnostic system

If the fill level is below the limit value, the fill level of the diesel particulate filter must be checked again at each oil service plus or maintenance service.
After installing the new diesel particulate filter the test cycle starts again after 100.000 miles.

Fill level of diesel particulate filter is above limit value.

Install new diesel particulate filter.


Engine 642.993 in model 906
with code ZU8 (National version for USA)
except code XM0 (Facelift)

AR14.40-D-1000SD


Engine 642.896 in model 906
with code ZU8 (National version for USA)
except code XM0 (Facelift)

AR49.10-D-5501SG


Engine 642.898 in model 906
with code XM0 (Facelift)
with code ZU8 (National version for USA)

AR49.10-D-5501S


Engine 651.9 in model 906
with code ZU8 (National version for USA)

AR49.10-D-5501M

Documenti citati