B33.25-0047-01
Stub axles
Zerk fittings (arrows)
B41.10-0011-01
Rear axle:
Zerk fitting (arrow)
B41.10-0010-01
intermediary bearing
Zerk fittings (arrows)
B41.10-0039-01
Gearbox
Zerk fitting (arrow)
B41.10-0041-01
Rear axle:
Zerk fittings (arrows)
| To lubricate through the zerk fittings, utilize only high pressure lubrication pumps not exceeding 10 to 15 bar. | ||
Lubricate | |||
1 | Clean the zerk fittings with a rag | ||
2 | Grease the lubrication points | A lubrication point may be considered well lubricated when fresh grease starts running out its contours. | |
Do not lubricate automatic regulators with the brakes applied (service or parking). | |||
Vehicle wheels are to be chocked to prevent unintentional vehicle rolling. | |||
To ensure good steering knuckle lubrication, it is recommended to lift the vehicle by the front axle. | |||
If necessary, turn the transmission shaft so that the lubrication pump can adapt correctly to the zerk fittings. | |||
On the transmission shaft, lubricate all universal joints, sliding sleeve and intermediate bearing. | |||
Wipe the exceeding grease. |