P60.10-2164-02
1 Supporting sleeve unmachined
2 Supporting sleeve machined
A Ø = 20 mm
B 10 mm
After production start-up of model 211, the torx bolts for mounting the rear engine mount (transmission crossmember) were phased out and replaced by hexagon bolts. The supporting sleeves 7211.7020 are contained in the Celette straightening bracket set 7211.300. The blind holes of the supporting sleeves are designed with a diameter of 15 mm for the torx bolt heads.
The blind holes must be drilled or hollowed out 10 mm deep with a diameter of 20 mm (see picture) so that the supporting sleeves can be used for the torx and hexagon bolt heads.