Test and adjustment values for gap dimensions |
Number | Designation | Model 415.601 | Model 415.603/605/703/705 | |||
BE60.00-N-1001-01D | Check gap dimensions | Engine hood to headlamp | Dimension "A" | mm | 3,5 (1,6) | 3,5 (1,6) |
Engine hood to fender | Dimension "B" | mm | 4 (1,5) | 4 (1,5) | ||
Engine hood to front paneling | Dimension "C" | mm | 3,5 (2) | 3,5 (2) | ||
For picture, see | ||||||
Test and adjustment values for gap dimensions |
Number | Designation | Model 415.601 | Model 415.603/605/703/705 | |||
BE60.00-N-1002-01D | Check gap dimensions | Fender to headlamp | Dimension "D" | mm | 2 (1,3) | 2 (1,3) |
Fender to front bumper | Dimension "E" | mm | 0,7 (0,7) | 0,7 (0,7) | ||
Fender to door sill | Dimension "F" | mm | 3 (1,5) | 3 (1,5) | ||
Fender to front door | Dimension "G" | mm | 4 (1,5) | 4 (1,5) | ||
Fender to A-pillar | Dimension "H" | mm | 4 (1) | 4 (1) | ||
For picture, see | ||||||
Test and adjustment values for gap dimensions |
Number | Designation | Model 415.601 | Model 415.603/605/703/705 | |||
BE60.00-N-1003-01D | Check gap dimensions | Front door to roof paneling | Dimension "I" | mm | 4 (1,5) | 4 (1,5) |
Front door to rocker panel | Dimension "J" | mm | 4 (1,5) | 4 (1,5) | ||
Front door to sidewall | Dimension "K" | mm | 4 (1,5) | 4 (1,5) | ||
Front door to sliding door | Dimension "L" | mm | - | 4,5 (2) | ||
For picture, see | ||||||
Test and adjustment values for gap dimensions |
Number | Designation | Model 415.601 | Model 415.603/605/703/705 | |||
BE60.00-N-1004-01D | Check gap dimensions | Sliding door to sidewall | Dimension "M" | mm | - | 4,5 (1,5) |
Sliding door to rocker panel | Dimension "N" | mm | - | 4 (1,5) | ||
Sliding door to cover for sliding door track | Dimension "O" | mm | - | 4,5 (2) | ||
Sliding door to rear side window | Dimension "P" | mm | - | 5 (1,5) | ||
Sliding door to roof paneling | Dimension "Q" | mm | - | 4 (1,5) | ||
For picture, see | - | |||||
Test and adjustment values for gap dimensions |
Number | Designation | Model 415.601 | Model 415.603/605/703/705 | |||
BE60.00-N-1005-01D | Check gap dimensions | Sidewall to taillamp | Dimension "R" | mm | 2 (1,5) | 2 (1,5) |
Sidewall to rear side window | Dimension "S" | mm | - | 4 (2) | ||
Sidewall to cover for sliding door rail | Dimension "T" | mm | - | 2 (1,8) | ||
For picture, see | ||||||
Test and adjustment values for gap dimensions |
Number | Designation | Model 415.601 | Model 415.603/605/703/705 | |||
BE60.00-N-1006-01D | Check gap dimensions | Liftgate to roof paneling | Dimension "U" | mm | 10 (3) | 10 (3) |
Liftgate to rear window | Dimension "V" | mm | 4 (1,5) | 4 (1,5) | ||
Liftgate to taillamp | Dimension "W" | mm | 4 (2) | 4 (2) | ||
Liftgate to rear bumper at bottom | Dimension "X" | mm | 7,2 (3) | 7,2 (3) | ||
Liftgate to rear bumper at side | Dimension "Y" | mm | 4 (2) | 4 (2) | ||
For picture, see | ||||||
Test and adjustment values for gap dimensions |
Number | Designation | Model 415.601 | Model 415.603/605/703/705 | |||
BE60.00-N-1007-01D | Check gap dimensions | Bumper at rear to taillamp | Dimension "Z" | mm | 2 (1,5) | 2 (1,5) |
Left rear-end door to right rear-end door | Dimension "AA" | mm | 4 (2) | 4 (2) | ||
Rear-end door to roof paneling | Dimension "AB" | mm | 10 (3) | 10 (3) | ||
Rear-end door to taillamp | Dimension "AC" | mm | 4 (2) | 4 (2) | ||
Rear-end door to bumper at side rear | Dimension "AD" | mm | 4 (2) | 4 (2) | ||
Rear-end door to bumper at bottom rear | Dimension "AE" | mm | 7,2 (3) | 7,2 (3) | ||
Rear-end door to rear window | Dimension "AF" | mm | 4 (1,5) | 4 (1,5) | ||
Side edge of left rear window to side edge of right rear window | Dimension "AG" | mm | 4 (2) | 4 (2) | ||
For picture, see | ||||||
129 589 03 21 00
Feeler gauge
Adjust hoods, doors and lids as shown in drawing.
The gap should not run wedge-shaped or be too narrow at points.
Deviations from parallel gap should be max. 0.5 mm over the entire length.
If the inside clearance of the gap is too large or too small, the movable body parts must be centered accordingly.
S60.00-4525-09
1 | Adjust gap dimensions with feeler gauge, adjust if required. |
S60.00-4526-12
S60.00-4527-09
S60.00-4528-09