Serije
hr
ar6000p070001qa
Gap dimensions on hoods, doors and lids
Vrsta ar · tema 60.00 · verzija 0103 · 2009-11-17
Vrijedi za: MODEL 209.4
Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.
Smještaj
Funkcijska skupina 3 Nadgradnja › 60 Nadgradnja Opšte › 60.00 Opšte — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.30 Cab — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.40 Front door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.41 Center door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.43 Rear-end door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.44 Sliding door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.45 Driver door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.46 Rear door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.47 Emergency door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.48 Lift door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.49 Luggage compartment door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.30 Engine hood — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.31 Front-end flap — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.33 Liftgate/trunk lid — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.34 Fuel filler flap/socket flap — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.60 Maintenance flap/service flap — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.61 Luggage compartment door — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.51 Passenger door 1 › 35.51.32 Door leaf/door frame — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.52 Passenger door 2 › 35.52.32 Door leaf/door frame — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.53 Passenger door 3 › 35.53.32 Door leaf/door frame — Serija 209 (modeli 4**)
EinPAS 35 Body/frame/detachable parts › 35.54 Passenger door 4 › 35.54.32 Door leaf/door frame — Serija 209 (modeli 4**)
AR60.00-P-0700-01QA
Gap dimensions on hoods, doors and lids
Test and adjustment values for gap dimensions
Number
Designation
Model 209.4
BE60.00-P-1001-01G
Gap dimension
Engine hood to fender
Dimension "A"
mm
3 ( 1)
Engine hood to headlamp
Dimension "B"
mm
4 ( 0.5)
Engine hood to bumper
Dimension "C"
mm
5 ( 0.5)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1002-01G
Gap dimension
Front door to A-pillar
Dimension "D"
mm
1
Front door to fender
Dimension "E"
mm
3.5 (-0.5/+1)
Front door to rear fender
Dimension "F"
mm
3.5 (-0.5/+1)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1003-01G
Gap dimension
Trunk lid to rear fender, top
Dimension "G"
mm
3.5 ( 1)
Trunk lid to rear lamp unit
Dimension "H"
mm
3.5 ( 0.5/+1)
Trunk lid to bumper
Dimension "I"
mm
6.5 (+1)
Rear fender to rear lamp unit
Dimension "J"
mm
3 ( 1)
Trunk lid license plate panel to rear lamp unit
Dimension "K"
mm
2.5 ( 0.5)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1004-01G
Gap dimension
Fuel filler flap
Dimension "L"
mm
3.2 (+0.5)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1005-01G
Gap dimension
Front door window and
Dimension "Q"
mm
8 (+1)
Front door window and soft top
Dimension "R"
mm
-
See picture
AR60.00-P-0700-01QA
BE60.00-P-1006-01G
Gap dimension
Soft top to windshield frame
Dimension "M"
mm
10 ( 2)
Soft top to soft top compartment cover
Dimension "N"
mm
3 ( 0.5)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1007-01G
Gap dimension
Soft top compartment cover/
Dimension "O"
mm
3 ( 0.5)
Soft top compartment cover to trunk lid
Dimension "P"
mm
4.5 ( 1)
See picture
AR60.00-P-0700-01QA
Adjust hoods, doors and lids as shown in drawing. The gap should not run wedge-shaped or be too narrow at points. Deviations from parallel gap should be max. 0.5 mm over the entire length. If the inside clearance is too large or too small, the movable body parts must be centered accordingly. The reference measurements apply only for repair work on bodies damaged in accidents.
